Club 80-90 Forums

Hi,
can anyone either point me to pics or post some up, please?

I need clear, detailed, shots of the nearside B-post at the front of the sliding door to show the shape of the skin and the seal recess as it blends into the sill. From, say 250mm above the inside floor level down to the bottom of the sill.

The repair panel doesn't include this area and it needs to be right to mate with the door lip as it closes.

I have been searching through metalmick8y's various threads without finding exactly what I need.

thanks

which threads have you looked at cos done them loads of times ,slider side and t'other in detail, im busy at the mo so will have a quick look for you later
mm

this do , there are others in the archive
https://club8090.co.uk/forum/viewtopic.p ... 0&start=15" onclick="window.open(this.href);return false;
the slider side are obviously done the same way just this is a left hooker
mm

Thanks MM.
That was one of the threads I had gone through and had forwarded to the bodyshop. I was looking for the left side B-post in case this right side one wasn't clear enough for him.

However, your pics proved good enough and the job is now done.

Thanks again,

Good,the posts are the saMe for all intensant purposes just easier to do without the runner assembly