Page 1 of 1
Drive shafts
Posted: 16 Oct 2015, 12:12
by peggy
Think i need to make up apair of drive shafts with boots and constant velocity joints for my b reg t25 petrol 1.9....Can any one tell me if they are a standard length .. Air cooled\2.1\1.9 petrol..i was going to make a set up and have the garage fit them for me ?
Re: Drive shafts
Posted: 16 Oct 2015, 12:25
by chapperss
All manual gearbox t25 drive shafts are the same. Steve
Re: Drive shafts
Posted: 16 Oct 2015, 13:14
by CovKid
Certainly the watercooled ones are.
Re: Drive shafts
Posted: 16 Oct 2015, 16:54
by bigherb
Aircooled shafts are longer as the gearbox is further forward, autos use different lengths either side.
Re: Drive shafts
Posted: 16 Oct 2015, 17:50
by chapperss
Well I didn't know the Aircooled ones are different. I've just taken out my dk Aircooled box from my 1990 van too. Steve
Re: Drive shafts
Posted: 16 Oct 2015, 19:15
by windy
Aircooled are different length to all the rest AFAIK. Best to just change the joints for some GKN Lobro ones.