Page 1 of 1

Dahboard lights not Working

Posted: 07 Oct 2015, 09:52
by crazyhorse
Hi gang, well. I thought I had done it but.....

Changed the speedo on the van, dash lights, indicators, evrything working etc.

Have put it back in and....surprise. No lights come on. Petrol gauge, indicator lights, temp gauge nothing.... nothing. But hey at least the speedo now works.

Have I blown a fuse by doing this, if so, which one do I change???

Thanks

d

Re: Dahboard lights not Working

Posted: 07 Oct 2015, 11:23
by Bubble Meister
Only thing common to all of them is them is the 14 pin multiplug on the dash and it's earth.

Re: Dahboard lights not Working

Posted: 07 Oct 2015, 15:28
by MidLifeCrisis
Just out of interest - does your headlight high beam indicator light work?
(It's the only thing on the dash that doesn't need 12v to work??)

Re: Dahboard lights not Working

Posted: 07 Oct 2015, 21:18
by crazyhorse
No lights working at all!

Re: Dahboard lights not Working

Posted: 07 Oct 2015, 21:24
by Ralf85
Bubble Meister wrote:Only thing common to all of them is them is the 14 pin multiplug on the dash and it's earth.
Yep that could be it. Try gently wiggling the multiplug. That cured it for me!

Re: Dahboard lights not Working

Posted: 09 Oct 2015, 14:31
by crazyhorse
Sorted,

I hadn't put the connector in properly

thanks all

Re: Dahboard lights not Working

Posted: 09 Oct 2015, 21:55
by Sir Brixalot
You got that flash of relief that follows an easy fix then!

Re: Dahboard lights not Working

Posted: 09 Oct 2015, 22:27
by Ralf85
Told ya! Great when the fix doesn't cost anything. That connector is very fragile so treat it gently! :ok