Page 1 of 1
Tie rod locking nut
Posted: 27 Aug 2015, 12:49
by what2do
The nut that locks the rack once the tracking has been set, mine are a little rounded and I was wondering if these are available separately. Alternatively, anyone know what size/pitch they are? Thanks.
Re: Tie rod locking nut
Posted: 27 Aug 2015, 13:13
by marlinowner
https://www.vwheritage.com/shop/type25- ... StartRow=1" onclick="window.open(this.href);return false;
They're M14 x 1.5
Re: Tie rod locking nut
Posted: 27 Aug 2015, 13:26
by what2do
Thanking you kindly. I notice they don't display the size/pitch so that I can get them locally!!
Re: Tie rod locking nut
Posted: 27 Aug 2015, 20:38
by Ian Hulley
what2d wrote:Thanking you kindly. I notice they don't display the size/pitch so that I can get them locally!!
M14 x 1.5 is Metric Fine so not 'off the shelf' so to speak. The sizes and thread pitches are normally available on Vagcat
Ian.
Re: Tie rod locking nut
Posted: 29 Aug 2015, 11:47
by what2do
Ian Hulley wrote:what2d wrote:Thanking you kindly. I notice they don't display the size/pitch so that I can get them locally!!
M14 x 1.5 is Metric Fine so not 'off the shelf' so to speak. The sizes and thread pitches are normally available on Vagcat
Ian.
Thanks for the info.