Club 80-90 Forums

Non t25 question but does anyone know the pinouts for the crank position sensor on a 2000 vw polo 1.0 petrol engine

there are 3 pins as its a hall sensor but im not sure which one is earth which is power and which is signal ( dont have car , only have the engine so cant test with a voltage meter)

S.

brown/white or brown/blue, earth
green/white, signal
red/black, power

cheers - cant actually see the colours as the sensor end of the wire which is all ive got is sealed from plug to sensor so will have to strip back to see them

from another forum i got pin 1 as +5v pin 2 signal and pin 3 earth so if colours match that i think i can be safe in assuming thats it..

will check tommorow
S.