Page 1 of 1
Old Audi coupe bits
Posted: 23 Dec 2006, 14:33
by KarlT
Hi All
Have ended up becoming the owner of a 2 door Audi coupe 1985 & was just wondering if there are any bits that are compatiable with our vans?
It has got 3 VDO gauges for oil tem/pressure & voltage which I was hoping to fit. Can I get senders for these for my van?
How about the power steering pump?
Or electric window bits?
Front brakes?
Any ideas?
Posted: 23 Dec 2006, 15:18
by PEET
think the interior door handle levers will fit...
Posted: 23 Dec 2006, 16:47
by toomanytoys
Not a lot will fit apart from what you can make fit.. gauges, int door release etc..
power steering pump is a special, usually does the power assistance on the brakes as well.. and uses special oil..
Are the wheels 4 stud? if so, not much use to a T25.. the brakes are not much bigger and if you use the calipers then the retaining bolts are smaller.. and they arte pretty similar to the later T25 ones in any case..
That said.. I could be interested in some bits as quite a bit is useable on my Audi 100
PM'd yer
Posted: 23 Dec 2006, 16:48
by poshbuggers
Gauges - yes, ask Baxter if he does the senders as I know he can supply gauges.
Window motors/electrics? Not sure but possible,
Brakes might be useful though it depends what spec they are whether they are any better than a standard van.
If its got rear discs save the whole set of calipers and discs 4 and 4 of. Futbus on here is working on an easy conversion.
If it has the reading lights in the grab handles let me know. I am looking for a few.