Will Audi Alloys Fit
Posted: 22 Dec 2006, 20:04
Will a set of 15 inch 43 off set audi alloys fit? I know that i will have to bore out the centre hole but will there be any other problems?
Thanks
Simon
Thanks
Simon
Club 80-90 Forums
For owners and lovers of VW T25 (T3) Vans
https://club8090.co.uk/forum/
Will Audi Alloys Fit
Page 1 of 1
Posted: 22 Dec 2006, 20:26
What width rim? The offset is quite big, you will usually need spacers with something with that amount of offset.
Posted: 22 Dec 2006, 21:31
I've got 15" x 7" Audi rims, ET 45 with 205/60/15 tyres
As you say you will need to enlarge the centre bore and you will need longer wheel bolts and 20mm spacers at the front to clear the top suspension
I also put 20mm spacers and longer studs on the back to make it look even
As you say you will need to enlarge the centre bore and you will need longer wheel bolts and 20mm spacers at the front to clear the top suspension
I also put 20mm spacers and longer studs on the back to make it look even
loading on wheels
Posted: 30 Dec 2006, 09:40
Be careful about the load on the new wheels - an Audi is lighter than a T25 - have a look at the Wiki pages and this page too
http://www.carbibles.com/tyre_bible.html
Look for "Load Index" details.
Wiki link is here:
https://club8090.co.uk/wiki/Wh ... ive_wheels
Hope this helps
VW Lewis
http://www.carbibles.com/tyre_bible.html
Look for "Load Index" details.
Wiki link is here:
https://club8090.co.uk/wiki/Wh ... ive_wheels
Hope this helps
VW Lewis