Club 80-90 Forums

Hi all, a couple of years ago we refitted our van with a rough but useable kitchen unit. It was the wrong colour and a bit ropey but has done the job. Now the chipboard has let water in and is expanding and crumbling so I plan to make a replica in MDF with vinyl wrap to provide the right finish. I'm hoping that someone may be able to point me at a set of plans so that I don't have to rip the old unit to pieces and make sure we can keep camping whilst I build the new one. The unit is pretty basic allowing for the hob below which is a grill with drop down door then grill then fridge and then on top along side the hob is the sink below which is the 3 shelf cupboard section. At the very end are the 2 folding squares that form the cover for the sink and a prop up extension to the worktop. I can provide pics it'll help someone help me find the specs.

Thanks

Ady

Any help http://www.camperinterior.co.uk/html/ma ... iture.html" onclick="window.open(this.href);return false;

Hi Jeff J, thanks for the link. I'm still going through that lot to see if it has what I need.

I've got a leisuredrive poptop that I've just about finished refurbing, here are some pictures - hopefully this might help?

kept some of the old ply but made mostly of new plywood and then covered with danish oil to bring out the grain