removing windows without trashing the rubbers
Posted: 08 Jul 2015, 07:34
i have had a good look around the interweb and cannot find anything useful. anyone got a link to a guide, or preferably a vid?
Club 80-90 Forums
For owners and lovers of VW T25 (T3) Vans
https://club8090.co.uk/forum/
removing windows without trashing the rubbers
Page 1 of 1
Re: removing windows without trashing the rubbers
Posted: 08 Jul 2015, 07:41
Factory fitted or cut in windows?
Re: removing windows without trashing the rubbers
Posted: 08 Jul 2015, 08:02
factory fitted.i have a a autosleeper vt20 pop top.
Re: removing windows without trashing the rubbers
Posted: 08 Jul 2015, 16:42
I found this vid really useful: https://www.youtube.com/watch?v=sLn_wuu1LnQ" onclick="window.open(this.href);return false;
Re: removing windows without trashing the rubbers
Posted: 08 Jul 2015, 16:57
Not factory fitted, I'm afraid.normal rules wrote:factory fitted.i have a a autosleeper vt20 pop top.
Autosleepers are converted panel vans.
So the rear side windows were fitted by Autosleeper.
The rubbers are not worth keeping (twenty five years old) as the replacements are much better, and not so expensive.
Re: removing windows without trashing the rubbers
Posted: 08 Jul 2015, 17:57
i removed mine using steel ruler to pull the rubber away on the inside so that i could get my fingertips which i had covered in fairy liquid & went all round the rubber , once i had done that i pushed them outwards where the wife caught hold of the glass & seal , i took all my windows out this way 
ps mine were factory fitted windows
ps mine were factory fitted windows