Page 1 of 1

Fer, Fer, Fer, Fer, Ferkin Fanbelts,,,,,,

Posted: 15 Dec 2006, 22:56
by Fritz
OK then in our case they are known as drive belts rather than anything more specific, and for this lecture I am refering to the belt fitted to the 1.9 DG petrol engine (1985/6) :D

I have found a spare belt in the cubby hole just inside the rear hatch which has the overall length of 1075mm, I find this wont fit my set up unless I fully remove the adjusting bolt on the adjusting bracket. :o

I have since tried to get hold of another from a local factors, who also tell me the one listed is the one with the 1075mm length , this is not what I want. :(

JK also suggests the one for my vehicle should be the 1075mm, but I disagree the one I need is a 1080mm, which I have since found to be the correct one for the job,,,,,

Anyone else noticed this error,,,,,,,,,,,,,,where can I get a 1080 from ?

Regards

Fritz,,,,,,,,,,,,

Posted: 15 Dec 2006, 23:02
by R0B
hey up mate.have you tried your local partco...

Posted: 15 Dec 2006, 23:22
by Simon Baxter
2 sizes used.

10x1075
10x1100

It's one, or the other.

FANNY BELT

Posted: 17 Dec 2006, 00:57
by Fritz
OK then it is not often I am right but it appears I am wrong again.









1100 mm it will be,,,,,,,,,,,

Regards

Fritz,,,,,,,,