Page 1 of 1
Wheels fitted is this correct ?
Posted: 13 Jun 2015, 20:04
by sternal
Today I had a bit of spare time so I fitted the wheels, really happy with how it looks.
But to be double sure its these two bolts that needed removing on the rear ?
Hand tightened the conversion studs with thread lock as directed by brickwerks.
Re: Wheels fitted is this correct ?
Posted: 13 Jun 2015, 20:29
by Wiredone2
No sure if you've seen this, might help.
http://www.brick-yard.co.uk/VehicleSpec ... ltwhls.htm" onclick="window.open(this.href);return false;
Re: Wheels fitted is this correct ?
Posted: 14 Jun 2015, 02:30
by gary1998
yep them two bolts the drum still held by studs
Re: Wheels fitted is this correct ?
Posted: 14 Jun 2015, 06:58
by sternal
Many thanks for confirming
Why are they there if it's okay for them to be removed ?
If fitting new shoes would they need to go back on to then be taken off again ? So as to centre ?
Re: Wheels fitted is this correct ?
Posted: 14 Jun 2015, 08:25
by pionte
sternal wrote:Many thanks for confirming
Why are they there if it's okay for them to be removed ?
If fitting new shoes would they need to go back on to then be taken off again ? So as to centre ?
Totally okay to take them of and disregard them, there are there originally to help hold everything in place when you refit the drums after working on the rears , whilst you adjust the shoes out against them .But you can just wind a wheel nut on to do this. If you hadnt of taken them of then you would have wobbly rear wheels
...It happens
