Club 80-90 Forums

Hi, I'm in a bit of bother here, one of the tips has broken off my front shifter rod.
There is a picture of one on the wiki, file name: Fourspeedp7.jpg with the comment, I'm unaware of any replacments!
This is not good - any suggestions? I prefer new to s/hand.
Thanks, Dave.

If its the metal broken, just get a piece welded on. If you're talking about the plastic ends you can order from Brickwerks (or in some cases even use tight-fitting plastic hose as replacement).

Image 7: https://club8090.co.uk/wiki/Fi ... peedp7.jpg" onclick="window.open(this.href);return false;

I did look on brickwerks, vw heritage & jk before posting maybe I missed it will look again.
It's the plastic thats broken, it looks to be molded on, so appears to be non replacable, I thought it would have to be the whole end replaced, will look into the tube idea if all else fails.

These?


https://www.brickwerks.co.uk/index.php/ ... yncro.html

Yes thats them, just did the search again (3rd time) and only the 5 speed ones come up Will buy from this link quick!

Now fitted, not driven yet but selects well on the drive. Also replaced all bearings & boots on the linkage, much better.

Been giving it a final check, watching the shift action from underneath.
Noticed somting that looks different on mine to all pics I have seen so far, the welded on ledge/reverse catch on mine seems to be bent up more than any others I have seen. The bend is in two stages, ie- it changes after leaving the surface it's welded to.
Does anyone know the correct dimension from the lowest part of the ledge to the base of the housing?
Thanks, Dave.