Page 1 of 1
aaaah indicators not working
Posted: 02 Jun 2015, 22:15
by hammy44
vehicle up for mot friday and now indicators not working.they work with hazard warning switch but not individually on indicating, fuse ok anyone got solution please time running out fast
Re: aaaah indicators not working
Posted: 02 Jun 2015, 23:11
by MidLifeCrisis
You have definitely checked the correct fuse for the indicators?? (It's not the same one as the hazards)
Other than that it can pretty much only be the indicator stalk ?!?!?!
Re: aaaah indicators not working
Posted: 03 Jun 2015, 07:42
by hammy44
fixed took the hazard switch out wiggled the connections and they now work must have been bad connection at switch,thanks for the reply
Re: aaaah indicators not working
Posted: 03 Jun 2015, 08:13
by MidLifeCrisis
Good stuff - glad you got it fixed, might want to keep an eye on it as it'll probably 'unfix' itself again at some point!!
If a 'wiggle' fixed it then it was 'probably' the indicator power coming into the switch that was faulty - should be the Black/Blue wire?
Re: aaaah indicators not working
Posted: 03 Jun 2015, 19:55
by hammy44
thanks midlife will investigate further after mot