Page 1 of 1
Sliding Doors
Posted: 25 May 2015, 07:54
by Chunksta
Guys,
What's the difficulty level to change out a sliding door please? Apart from it being blumming heavy???
Re: Sliding Doors
Posted: 25 May 2015, 08:47
by Jonnyb416
Pretty easy. When removing, line the middle runner with the notch in the slider rail and lift off, slowly lower the door and angle in out. When refitting put the bottom part in then the top bit and finally line up the middle runner over the notch. It is a lot easier with 2 people. Saves dropping and damaging something.
Re: Sliding Doors
Posted: 25 May 2015, 09:09
by Chunksta
Jonnyb416 wrote:Pretty easy. When removing, line the middle runner with the notch in the slider rail and lift off, slowly lower the door and angle in out. When refitting put the bottom part in then the top bit and finally line up the middle runner over the notch. It is a lot easier with 2 people. Saves dropping and damaging something.
Cheers Jonny