Page 1 of 1
oil filler neck
Posted: 23 May 2015, 07:30
by Jonogood
Hi,
The plastic oil filler neck on my '89 1.9 petrol has split and I have been trying to source a replacement without success. Can anyone suggest where I might get one?
Many thanks
Re: oil filler neck
Posted: 23 May 2015, 07:36
by dave friday
http://www.brickwerks.co.uk" onclick="window.open(this.href);return false;
Re: oil filler neck
Posted: 23 May 2015, 07:40
by itchyfeet
Been out of stock at Brickwerks for a long time
second hand only I think now
try wanted
Re: oil filler neck
Posted: 23 May 2015, 09:02
by dave friday
Oh! bugger.
Re: oil filler neck
Posted: 23 May 2015, 10:09
by CovKid
Covkids brain running on overdrive....some kind of hose (concertina?), jublilee clip, cap to fit on end. Should be dooable. Either way I think I'd make one if I couldn't get one.

Re: oil filler neck
Posted: 23 May 2015, 10:22
by edoh
Re: oil filler neck
Posted: 24 May 2015, 11:21
by guavajelly
Re: oil filler neck
Posted: 25 May 2015, 06:59
by Jonogood
Many thanks for the replies. Unfortunately the one on ebay is not compatible. I'll try a wanted post and failing that will just have to continue with the patch job
Re: oil filler neck
Posted: 25 May 2015, 08:48
by kevtherev
Try NW VW breakers.
Re: oil filler neck
Posted: 25 May 2015, 09:00
by NicBeeee
After an engine rebuild I mashed up anouther way of doing this repair, silicon pipe and a couple of decent stainless T bolt clamps, also put a stainless tube inside that slips into the steel filler neck, also allows easier removal if you need to drop the engine to give more elbow room.

Re: oil filler neck
Posted: 25 May 2015, 11:17
by bigherb
You can repair them various ways with silicone hose depending on where they have broken, for CU engines I completely replace the plastic part with a new filler.

Re: oil filler neck
Posted: 25 May 2015, 12:09
by CovKid
Yep, my approach too. By the time you've waited for one to show up, its probably easier to make one. The stock one isn't that great anyway and modern materials last longer.
Re: oil filler neck
Posted: 25 May 2015, 13:08
by Ralf85
Jonogood wrote:Hi,
The plastic oil filler neck on my '89 1.9 petrol has split and I have been trying to source a replacement without success. Can anyone suggest where I might get one?
Many thanks
Have you e-mailed Brickwerks to ask when they expect them in again? They are very helpful.
Re: oil filler neck
Posted: 07 Jun 2015, 00:06
by Jonogood
Thanks for all the replies. I did contact Brickwerks and they were unable to indicate when they would get filler necks/pipes in. Looks like I will have to have a go at making one. Thanks again
Re: oil filler neck
Posted: 07 Jun 2015, 08:40
by CJH
There seems to be one in this little lot:
https://club8090.co.uk/forum/viewtopic.p ... 1#p8079228" onclick="window.open(this.href);return false;