Club 80-90 Forums

Morning campers!
I am about to run LED strip lighting around the top of my curtain rail in my van.
The thing is I don't want it to unstick and start falling off after a short while, but, I don't want to superglue it in place in case it needs changing.
Anyone got any tips on how to make it stick firmly but be replaceable if needed.
Ta very much!

Yes, you can buy narrow trunking like this (although buy locally): http://www.qvsdirect.com/self-adhesive- ... wwodKSkAqQ" onclick="window.open(this.href);return false;

You can stick the strip inside one half (deep or shallow side - up to you) after you've screwed it up. Be careful, some adhesives kill LED strip.

I stuck the led strip to a narrow aluminium bar, about 2mm thick and use a self tapping screw at each end to hold it in place. You can get the strip from b and q, and the led strip status well stuck to it.