Club 80-90 Forums

Hi

Just took the sliding door card off so I could remove the catch on the sliding door, as it was popping open when driving. And now the central locking isn't working, not sure if I have blown a fuse, as I did touch the brass pins on the sliding door with a screw driver? As in the photo below. If it is a fuse which one would it be? Or have I disturbed the Actuator while putting the door card back on?

Any thoughts appreciated.

Thanks
Jack

If none of the doors lock or unlock electrically, you have probably blown the fuse.
Its number 23, somewhere across the top of the fuse board.
This might help:
http://www.pbase.com/tonytech/image/84733738/large
http://www.pbase.com/tonytech/image/84733739

T

Thanks Tony, will check it out

Yep no.23 20amp fuse, didn't have a spare so robbed it from the rear window heater for now.
Cheers again Tony. Very glad it wasn't the actuator.