Club 80-90 Forums

JX turbo fitted onto an AAZ by 4 bolts, two different sizes. Anyone know what combination of sizes they are - I'm thinking 2 small and 2 large?

Thanks

Taa-daa!

http://www.brickwerks.co.uk/index.php/t ... o-aaz.html

I'm obliged!

Just done this job,got all four out in one piece.must heat them up before attempting to remove these tough little buggers.I used a little gas blow touch to heat the bolt and area around them.good luck

Thanks - gave them several a good soakings in plusgas and was lucky enough to get them out in one piece. New turbo, new studs with copper nuts and all back in and looking good (took me two and a half hours of swearing cos the oil feed pipe wouldn't fit on before I realised you can swivel the turbo housing...doh!).

Bit of a pig to refit the drain pipe to the sump - looks very stretched...