Page 1 of 1

T25 Overhead Locker Fitting

Posted: 28 Apr 2015, 11:26
by drew857
Hi there,

New to Club and VW T25.

Have recently purchased a 1985 Carvelle from Peter at Wagon Build and I am very pleased with the purchase. In the process of building an interior and would like to make an Overhead Storage Locker.

Fairly happy to build and scribe in but wondering how to fix to roof. The Carvelle has nice original Headlining and do not want to damage more than I have to - Any pointers greatly appreciated.

Andrew

Re: T25 Overhead Locker Fitting

Posted: 28 Apr 2015, 11:35
by Titus A Duxass
How's your German?

Or get google translating -
http://www.t3-infos.de/t3-infos_f.html ... urn false;

Re: T25 Overhead Locker Fitting

Posted: 28 Apr 2015, 11:47
by tforturton
I assume you're talking about the area over the engine cover, at the back of the van? Most overhead lockers have one end bolted to the wardrobe at the side, and the other end fixes to the inside of the roof. If you feel around the headlining, you'll see that the roof is double-skinned for a few inches all round (be careful!). You can fix self-tappers into this area, but obviously this will leave screw holes in the headlining, if you take the cupboard out at a later date. If you don't have a wardrobe, you can fix it to the roof at both ends - but make sure you're drilling in the right place!

Re: T25 Overhead Locker Fitting

Posted: 28 Apr 2015, 11:49
by drew857
Awesome Buddy, this will help greatly... :D