Page 1 of 1
Speedo not working
Posted: 16 Apr 2015, 10:11
by rob1927
Hello could anyone kindly advise on the following?
Speedo not working, cable ok at the speedo end, as in connected properly, but can't find where the cable should connect to the gearbox. Can any one tell me where it connects into the gearbox?
Cheers.
Re: Speedo not working
Posted: 16 Apr 2015, 10:26
by dave friday
Hi Rob!! how y doing? I think it goes to the front nearside wheel?
Cold up where you live?
Re: Speedo not working
Posted: 16 Apr 2015, 10:30
by CovKid
If you look in the centre of the wheel cap, you'll see a small square hole out of which should be sticking the square end of speedo cable, held by an 8mm e-clip.
Re: Speedo not working
Posted: 16 Apr 2015, 11:30
by rob1927
Thanks fellas, thought it went to the gearbox! Back residing in the uk now, going through the import procedures now, vans running great has been since I left Finland in it, alternater bearings making a racket but nothing major, hope yas are fine and well

Re: Speedo not working
Posted: 17 Apr 2015, 09:18
by MattBW
CovKid wrote:If you look in the centre of the wheel cap, you'll see a small square hole out of which should be sticking the square end of speedo cable, held by an 8mm e-clip.
Yeah I had problems with mine, just needed a new clip and all good.
Re: Speedo not working
Posted: 21 Apr 2015, 22:34
by camper Dave
so rob what was the problem ?
Re: Speedo not working
Posted: 22 Apr 2015, 17:59
by rob1927
Thanks for the advise folks, not had chance to sort it yet, bin working like a dawg! It'll need doing over the next couple of weeks for its first MOT, I'll keep posted, thanks again, much appreciated
