Club 80-90 Forums

What's the thread size for the oil pressure sender on an early 1.9 DG.
I'm sorting parts out to fit a wet pressure gauge.
Thanks

M10X1 same on all WBX
You can check it by looking at the switch spec on Brickwerks website
http://www.brickwerks.co.uk/index.php/t ... -blue.html" onclick="window.open(this.href);return false;

be careful to check your t piece will fit I went for a remote one because I had an electric sender but if it's just a pipe a 50mm one may work, looks tight though

https://club8090.co.uk/forum/viewtopic.p ... e#p8053293" onclick="window.open(this.href);return false;

Cheers itchy , im looking at putting an extension on then coupling up to it similar to your set up

Those remote t pieces are not cheap, about 30 quid

Yeah ive seen

My wet gauge has been in for several years now.
I fitted two T pieces together from demon tweeks to get it in a position to attach the pressure switch and the ptfe tube.
However they sell the proper thing now
http://www.demon-tweeks.co.uk/performan ... te-t-piece" onclick="window.open(this.href);return false;

Nice one Kev , cheers