Page 1 of 1
advice please
Posted: 13 Mar 2015, 17:44
by monkeyboysee
on last years MOT, i had the following advisories:
"front anti-rollbar linkage rubber bush deteriorated but not resulting in excessive movement".
while the van is away getting the engine sorted, i intend to get what i need next time GSF have a flash sale; could someone point me in the direction of what i need please, quantities, and extras etc.
cheers
Re: advice please
Posted: 13 Mar 2015, 18:02
by CovKid
There is more than two if you include bar ends so you'll need to get under and look. Big ones that are bolted to floor are best replaced with powerflex if you can afford it. Rest probably not available from GSF though might be on their VEEWEE site. I found VW themselves were not that expensive for antirollbar bushes.
Also read
https://club8090.co.uk/forum/viewtopic.php?f=37&t=140083" onclick="window.open(this.href);return false; as droplinks form part of antirollbar
Re: advice please
Posted: 13 Mar 2015, 18:41
by kevtherev
There is an alternative type.
Powerflex - Polyurethane Bushes
http://www.powerflex.co.uk/road-series/ ... 762/1.html" onclick="window.open(this.href);return false;
Or Brickwerks sell these for the T25, or from e bay.
Re: advice please
Posted: 13 Mar 2015, 18:57
by BOXY
I got the drop-link bushes, washers and anti-roll bar bushes all from GSF last year. All cheap, had change from £20.
427VG0050 Antiroll Bar Link Rubber
Antiroll Bar Link Rubber for use on Vans 1980 to 1992. Two required per side. Equivalent to part number: 411513121
427VG0080 Antiroll Bar Link Washer
Washer needed for antiroll bar link Set up on Vans 1980 to 1992. Two per side. Equivalent to part number: 171512337
429VG0070 Front Antiroll Bar Bush - Inner
Front Inner Antiroll Bar Bush for Vans 1980 onwards. Equivalent to part number: 251411041B
http://www.veewee.co.uk/index.php/parts ... er+80+-+91" onclick="window.open(this.href);return false;
Re: advice please
Posted: 13 Mar 2015, 21:21
by CovKid
I mentioned powerflex early in the thread Kev. Personally I'd definately advocate them for the main antirollbar mounts (if budget can be stretched to them) simply because they do make a difference there and last much longer. I don't on droplinks but only because they have a habit of snapping and then you lose the new lower bushes you fitted. Would be different if new droplinks were used. As powerflex isn't cheap, its not always an option ofcourse - particularly if you're supporting a young family or are a student. The cheaper ones are fine but they will eventually need renewing again.
Re: advice please
Posted: 13 Mar 2015, 22:30
by BOXY
particularly if you're supporting a young family or are a student.
I'm just tight.
