Club 80-90 Forums

Hi all,

Has anybody got any recommendations for what air filter to use on my scooby conversions. EJ20 engine of that helps.
Thanks very much.

best is the one from the later subaru engines that sits on the throttle body in the car then use RJES air intake and fit the airbox in the left hand side of engine bay half in behind the left light cluster, RJES intake can be had with abracket to fit the MAF to if you have a maf and you can connect the airbox to the diesel snorkel set up in the left intake for the wuietest and driest air intake

Thanks Aiden. Sounds like a good plan.

Aidan wrote:best is the one from the later subaru engines that sits on the throttle body in the car then use RJES air intake and fit the airbox in the left hand side of engine bay half in behind the left light cluster, RJES intake can be had with abracket to fit the MAF to if you have a maf and you can connect the airbox to the diesel snorkel set up in the left intake for the wuietest and driest air intake

Hmm, sounds familiar

Using silicone hose from throttle body around engine bay to Maf, then using original Subaru plastic intake pipework running to Ramair foam filter behind light cluster as per Aidens suggestion.