Eberspacher.... Ducts
Posted: 20 Feb 2015, 15:43
Hi,
I need to replace the outer of the two ducts which drop from the floor an turns 90 degrees into the Eberspacher D2L.
I shall replace both, but after discussing the issue with a supplier, it seems that it is not quite as simple as sourcing two 460mm long, 90mm internal diameter air ducts which will turn a 90 degree bend from the floor of the camper into the under slung heater.
Any ideas for the ducts or suppliers?
Both ducts rely upon jubilee clips to secure the hose to the floor / heater.
Regards
Graham
I need to replace the outer of the two ducts which drop from the floor an turns 90 degrees into the Eberspacher D2L.
I shall replace both, but after discussing the issue with a supplier, it seems that it is not quite as simple as sourcing two 460mm long, 90mm internal diameter air ducts which will turn a 90 degree bend from the floor of the camper into the under slung heater.
Any ideas for the ducts or suppliers?
Both ducts rely upon jubilee clips to secure the hose to the floor / heater.
Regards
Graham