Club 80-90 Forums

Hi,

I need some help in acquiring a window seal for the hinged window opposite the sliding door of a T25, MY 1990, Westy.
This seal is semi-rigid, with a "U" profile and a rubber compressable tubular section to one side of the profile.
The profile is black with what seems as a material covering.

I do not know if these are available new or one which is used and in very good condition.

Also I need the steel, grey, coloured,plastic / material, rigid cover strip which is found encasing the upper steel edge of the same, helping to fix the extrusion which is the hindge for the same window.
Any help will be appreciated.
Regards
Graham

this the seal you mean?
http://www.serial-kombi.com/en-GB/trans ... 92-n312941" onclick="window.open(this.href);return false;

don't quite get what the other part your looking for is, but have a look on that site. they have most things

Hi,
Cheers for this........looks like the seal.
As far as the cover strip is concerned-------- this piece covers the steel window edge and internally supports the internal bulkhead above the cooker / wash and basin.
This cover strip also looks to be supporting the external metal extruded channel which acts as the top hindge for the window.
Regards
Graham