Page 1 of 1
Removing a panel van bulkhead
Posted: 23 Nov 2006, 11:14
by SteveW
Any one done this? How easy is it to do?
Thanks Steve
Posted: 23 Nov 2006, 12:38
by kyleewyleecoyote
I've got a book 'How to convert your vw bus to a camper' it shows how to do it in there. It looks pretty simple, but it always does in the picures!
I'll scan the pages for you, but won't be able to upload them until monday.
If this helps send me PM with email address as I can't upload onto forum.
Posted: 23 Nov 2006, 12:51
by SteveW
Doh! I have that book. Will look in it tonight.
Thanks for jogging my memory
Posted: 24 Nov 2006, 20:38
by garyd
SteveW,
how did this work out? I now have a panel van with full bulkhead which I intend to remove.
Are the instruction clear & useful? Any difficult points?
Any help welcome,
thanks
Garyd
Posted: 25 Nov 2006, 14:55
by DiscoDave
you will need an angle grinder (pref with cutting disc) and a reciprocating saw! just go for it!
Posted: 27 Nov 2006, 09:31
by SteveW
We did not go for the panel van in the end and got a Caravelle.
I did look in the book and the actual pictures are for a T4 but they do give you an idea of what needs to be done and how to go about it. Probably worth getting the book if you are doing a full conversion, I would not bother if you are only wanting to remove the bulkhead.