Club 80-90 Forums

I seem to spend many cold evenings tracking down a blown fuse for one thing or another, usually the westy camping kit. Is it usual for fuses to blow regularly? I'm starting to think the wiring needs a full overhaul, or perhaps there is a simple solution? Any views would be appreciated.

Cheers

No its not usual ....but are we talking 'random' or 1 or two fuses in particular? blower/wipers is a common one with a seizing heater blower.

Blowing fuses indicates high current flow or short to ground so needs sorting but one would hope that this isn't just random and is isolated to just one or two fuses.

Martin

Thanks for that, seems to be pretty random, but its getting to the point of being very annoying. Seems to mainly be the camping kit.

.

Devon Pete wrote:I seem to spend many cold evenings tracking down a blown fuse for one thing or another, usually the westy camping kit. Is it usual for fuses to blow regularly? I'm starting to think the wiring needs a full overhaul, or perhaps there is a simple solution? Any views would be appreciated.

Cheers

Well, probably just the circuits that blow fuses
.

Has any wiring been moved/changed recently? Where are the fuses located that you are talking about?

Also...'Camping Kit' original westy....if its like mine then there are just the two fuses on the B post behind the drivers seat. Eberspacher blow heater and the kitchen block fuses.
Are there extra fuses that have been added & what are they for? what are their ratings?

Martin

I have the two main fuses on the B pillar, but there are also two fuses between the B pillar and the leisure battery. Sounds like some tampering has happened in past?? Interestingly, I replaced a 15 amp fuse running off the leisure battery (between that and the B pillar) and it fixed the control panel on the cooker unit (showing leisure battery charge), the water pump for the tap and the rear fog light! Is this as odd as it's beginning to sound? Would it be helpful if I took a few pics?

Maybe one of the issues is that the wrong ampage fuse has been installed. Not sure how you would test for the right one!? Any ideas?

Devon Pete wrote:I replaced a 15 amp fuse running off the leisure battery (between that and the B pillar) and it fixed the control panel on the cooker unit (showing leisure battery charge), the water pump for the tap and the rear fog light!

Who's a lucky boy then
.

Standard two fuse 'Continental' fuse holder (bullet type fuses)
Red 16amp fuse closest to the cupboard.
White 8amp fuse closest to the door is for the kitchen block.

These old style fuse holders aren't the most reliable, the fuse ends tarnish causing resistance and heat, the heat causes the brass spring contacts to loosen further increasing resistance and heat.
It is not unusual to see 'melted' fuses for the above reasons. Note* be very wary of cheap 'plastic' bullet fuses, the better ones are ceramic and don't melt. I haven't done mine yet but I am going to change my fuse box for a newer 'blade' type which are more reliable.

Martin