Club 80-90 Forums

Hi guys
am new to the sight as i have just purchesed a Devon T25 1.6 air cooled it aint complete but its not a shed things wrong needs speedo and some switches but thats not why am putting this post out any body know anything about the clutch cable where it attaches to on the peddle and the hose for the brake servo,went underneth it today found speedo cable round front wheel it is now routed back into cab just have to find speedo but allso found end of clutch cable with no idea where it goes and brake servo pipe with no hose well when i say no hose the hose under the van is missing tryed to look on line for some informaction cant find a thing so dont know if any thing is missing i suspect there is so ifany body can help would be nice thanks westie .

It might not actually have a servo, early 1600 vans didn't.
The clutch cable hooks onto the clutch pedal and the threaded end onto the clutch release arm with a wing nut.

it douse have a servo mate its monted under the dash am trying to get hold of a manual hopefully help me better.

Lets try it another way, it wasn't built with a servo it may have one now with a new pedal box which may explain why the clutch cable is not connected.

yes mate your right looks like the guy that had it before me was in the proccess of changing it to hydrolic clutch but only got as far as changing the pedals how hard is it to change or woud it be easyer to change it back to cable operated and where would be the best place to get parts as i dont know alot about these vans .

I would wait until you get a manual and then see what parts are missing then take the easiest route.

hi mate yes got the manual and decided to go the clutch cable route have managed to get hold of a set of peddals as the cable and every thing is there so why change it if it aint broken .