Page 1 of 1
Found Audi 100 quattro
Posted: 16 Nov 2006, 21:15
by PC52
I have found an Audi 100 quattro. Are their any parts on this which would be useful with the syncros? I don't need anything at the moment but I'm thinking about building up a bit of a store for those unforeseen moments or adding a bit of luxury.
ps
Posted: 16 Nov 2006, 21:30
by PC52
PS also found subaru engine - complete with wiring ecu etc I think its a 2 litre out of a 4wd legacy anybody interested?
Posted: 16 Nov 2006, 21:34
by HarryMann
Front discs off the Audi possibly, after a quick bit of machining, but maybe I've got my models wrong and it was Audi 200..
Keep your eye out for low mileage EJ22's, the NA 2.0 litres weren't imported I think here, and the 2.0 turbops are not desirable for a T25. The eng. numbers are on the bellhosuing mating face, top LHS and hard to see.
Scooby
Posted: 16 Nov 2006, 21:56
by blurb55
Could be interested in the scooby motor - what's the engine number please. Ta Paul.
Posted: 17 Nov 2006, 09:16
by toomanytoys
I could be interestd inthe rear calipers and carriers if working?? mine on my Avant have seized... I think the quattro reasr are the same...
Oh.. so I could be interested in any other 100 parts (interior/body etc etc)
There isnt much that could poss swap over.. front brakes are similar caliper but bigger disc.. but caliper retaining bolts are only 12mm t25 is 16mm....
audi 100
Posted: 17 Nov 2006, 20:57
by PC52
Was going to have a look today but rain stopped me so I went to play in the puddles and mud with my newly registered (gearbox rebuilt) beast - it was SPOT on (bit of a problem with the speedo) .
I don't know the engine code for the scooby yet, possibly try to go tommorrow. The Audi 100 interior is good, light grey and black, Panels , doors, glass etc are all good, everything still available except front brakes and one rear electric window switch. The car has been standing for a while so I will check out the rear brakes properly tommorrow.
Posted: 18 Nov 2006, 16:37
by futbus
Give us a quick call reference fitting front discs, as fitted some to my syncro, I`ll try to find a link to this.
http://www.brick-yard.co.uk/forum/forum ... 10762&PN=1
Posted: 18 Nov 2006, 16:38
by futbus
Give us a quick call reference fitting front discs, as fitted some to my syncro, I`ll try to find a link to this.
http://www.brick-yard.co.uk/forum/forum ... 10762&PN=1