Page 1 of 1

Hitop bolt location and sealant

Posted: 03 Sep 2014, 05:17
by hawkeye
I had a leak somewhere on my hitop so I am starting checks all round the hitop roof , I need to locate the fastening bolts as there seems to be movement/play in the side walls on the roof ,however I don't want to remove the headling if possible , also which sealant should I use around the body to roof joint and does it need to be sealed right down the length of the hitop i.e. into the guttering ?

Re: Hitop bolt location and sealant

Posted: 03 Sep 2014, 07:10
by Jakemate
Sikaflex as it's a very strong adhesive sealant and flexible. If you get any on the paintwork anywhere else rub it off with thinners, brake cleaner or similar as it's a bitch to get off when dry.

Re: Hitop bolt location and sealant

Posted: 03 Sep 2014, 08:01
by hawkeye
Jakemate wrote:Sikaflex as it's a very strong adhesive sealant and flexible. If you get any on the paintwork anywhere else rub it off with thinners, brake cleaner or similar as it's a bitch to get off when dry.
Thanks Jake , I assume can be over painted , and do I run it around guttering or not needed ?

Re: Hitop bolt location and sealant

Posted: 03 Sep 2014, 18:07
by hawkeye
Whilst rubbing down the hitop I see an area of previous damage that has been repaired but considerable cracking , as the cracks are not severe enough to fill
I am wondering weather I should treat it with a flexible coat of some kind or just a thin smear of filler ?
advise greatly appreciated . :ok