Club 80-90 Forums

Hi All

Going to repair/replace the inner, outer sill and lower panel on my van.
The bottom of the B pillar is also rotten so I will need to rebuild, does anyone know how thick the metal on the structural part is (not the outer) is?

Cheers
Myles

slider side or other?
either way, picks of what you have and are doing will help but b post inner 1.25'' min and the reinforcing part (you have to make) 3mm min
ive done a few but you will have to search my threads as they are not in the wiki
mm

Thanks MM
Cheers
Myles

Yes inner min 1.25 ota
mm

Cheers