Page 1 of 1
Simple Question
Posted: 13 Nov 2006, 10:23
by KarlT
Hi One & All.
Brother has found an old syncro panel van in a hedge full of scrap car bits/metal.
I've told him it will be OK to tow it using his 'one man towing brace'.
Is that right?
Posted: 13 Nov 2006, 10:42
by Mudlark
Provided it rolls it is fine to tow it with four wheels on the ground; subject to the usual proviso's:
All four wheels are the same size.
Posted: 13 Nov 2006, 11:54
by Hacksawbob
and/or remove prop shaft.
Posted: 13 Nov 2006, 12:04
by toomanytoys
Only need to remove prop shaft if lifting front or rear wheels off the ground.. if all 4 wheels on the ground no problems...
If "spec lift" etc he WILL break something if the propshaft (gearbox to front diff) no matter how short a distance.. (a few feet would be ok, but not even 100 yards...)
Posted: 13 Nov 2006, 13:40
by Ye Olde Syncrospares
ive A framed back from sweden itll be fine,cj.