RM 212 Fridge - Air Vent
Posted: 16 Jul 2014, 15:11
Looking at some diagrams for installation of these fridges and recommendations for providing adequate airflow, it stated that an air intake in the floor was required.
I had a good look on my T25 and I couldn't find one. It is an Autosleeper conversion.
The fridge works reasonably well but never cold enough to freeze in the ice compartment.
I had a good look on my T25 and I couldn't find one. It is an Autosleeper conversion.
The fridge works reasonably well but never cold enough to freeze in the ice compartment.