Club 80-90 Forums

Im stuck in 4th, the bit that fits between the gearbox and the gear shift has fallen off!

http://www.justkampers.com/251-711-221- ... -1992.html" onclick="window.open(this.href);return false;

that's the bit! can someone tell me if the JK one is any good or Do Brickwerks do one ( as id rather buy from them) I cant see how if fixes on or is it just a case of pop the ball in the socket on the gear linkage and its all held on the side of the gear box with will power?


Thanks in advance for any help

http://www.brickwerks.co.uk/index.php/t ... lever.html

Held on to the shaft with a nut - which is accessed through the hole.

nice one thanks.

any tips for getting it all lined up right?

It will only go on the shaft in one position so no lining up needed.

Ok on the end on the shaft from the gearbox there's a nut, looks like it was not done up against the relay lever.
on taking this nut off and trying it with the relay lever it just slips through both the splined hole and non splined hole, is this because the relay lever part is knackered or am I missing a washer.

Photo

ChrisTriple wrote:
http://www.justkampers.com/251-711-221- ... -1992.html" onclick="window.open(this.href);return false;

It's that part if that helps, sorry vans left at the girlfriends house so I can get a pic today

ChrisTriple wrote:am I missing a washer.

Yes a large thick one M8 x 20 x 2.5

Nice one thanks, now to find one

Well that's now sorted, bit to much of a job really, hardest bit was getting the new rubber cover onto the new renal lever


Thanks for the help

Kidney lever?

Hahahahaha sorry relay lever, I'd been up since 4am