Page 1 of 1

campervan fridge

Posted: 05 Jun 2014, 15:55
by Ernest
I am seeking advice....I have a 1990 T25 Holdsworth Villa 3 conversion. When first bought 7 years ago I used the fridge just once and all OK. I haven't used the fridge since and when I tried to turn it on last week there was no ignition (spark) for gas and it also doesn't seem to work on the 12 volt. Any ideas/suggestions would be very welcome - or even a recommendation of somewhere I could take it too in Sothern England for repair. I would prefer not to buy a new one as, apart from the cost, the original has a 'wood-effect' covering to match the van furnishing.

Ernest

0208-462-8635

Re: campervan fridge

Posted: 05 Jun 2014, 18:58
by Mocki
Hi
Last things first...... The doors can be swapped over easily enough, or indeed the matching insert swapped over to the new fridge door

As for the igniter , from my experience , if it's got power ( normally from the leisure battery, maybe via a zig or control panel ) it's the earth that is corroded, normally to the body of the fridge at the back near the burner .

Re: campervan fridge

Posted: 05 Jun 2014, 19:58
by dbz864
hi, theres some fuses, or/and a earth connection check them out, im pretty sure that be it. just behind the drvs door on the side.near the seat belt

Re: campervan fridge

Posted: 06 Jun 2014, 20:00
by Ernest
Dear Steve and 'dbz864

Thanks very much for this helpful - and very prompt - feedback. I will follow-up the suggestions.

Ernest

Re: campervan fridge

Posted: 07 Aug 2014, 14:25
by pjjjhjjj
Hello there - I have just bought a Holdsworth Villa 3 and I have exactly the same problem with my fridge - did you manage to find out what was wrong?
how did you fix the problem?

any advice would really be appreciated.

kind regards

Pete

Re: campervan fridge

Posted: 07 Aug 2014, 14:53
by Ernest
Dear Peter

No...I haven't been able to make any progress with this. As I don't use the fridge this hasn't been much of an issue. Mind you, it would be nice to get it working again.
So if you do manage to find a solution I would appreciate an up-date.

Best Wishes
Ernest