Page 1 of 1
					
				seats
				Posted: 20 May 2014, 20:17
				by dub1670
				just bought 1980 devon.  and am wanting to know if im able to fit a front bench seat or manage to fit 3 seat belts on the rock and roller bed.  theres 5 of us you see.
			 
			
					
				Re: seats
				Posted: 20 May 2014, 21:11
				by richlaz
				If it's a 3/4 width bed, you can't really fit more than two people on it.
Your best bet is to try and find a double passenger seat for the cab, and fit the extra seatbelt.
Or, have you considered a "buddy seat" which would go behind the passenger seat and face backwards?

 
			 
			
					
				Re: seats
				Posted: 21 May 2014, 11:56
				by dub1670
				ah roger, that'll work. build a seat behind pass seat. wheres the seat belt mounted?
			 
			
					
				Re: seats
				Posted: 23 May 2014, 08:48
				by richlaz
				Might be a couple of spare threaded inserts on the chassis around that area, or possibly use the passenger seat mountings, so you'd have two seatbelts bolted into the same point (not sure if that would be allowed or not? Somebody should be able to confirm?) 

 
			 
			
					
				Re: seats
				Posted: 23 May 2014, 20:37
				by ChrisTriple
				richlaz wrote:use the passenger seat mountings, so you'd have two seatbelts bolted into the same point (not sure if that would be allowed or not? Somebody should be able to confirm?) 

 
 That's how mine are fitted never had any problems
 
			 
			
					
				Re: seats
				Posted: 01 Jun 2014, 12:57
				by dub1670
				richlaz, do you have anymore pictures of the buddy seat in your van, woud'nt mind seeing how its fitted.  looking at building my own and putting 3 point harness on the rock and roller bed or does anyone know if it would be possible to fit a 3 pointer on the buddy seat.
			 
			
					
				Re: seats
				Posted: 01 Jun 2014, 19:51
				by CovKid
				Not a lot of point unless you're contemplating crashing in reverse.  

 
			 
			
					
				Re: seats
				Posted: 01 Jun 2014, 20:04
				by dub1670
				there is that!
			 
			
					
				Re: seats
				Posted: 02 Jun 2014, 08:45
				by SunnyBus
				I have a bus just like yours and a seatbelt technician is about to come and do some fitting for me . I will ask him!
			 
			
					
				Re: seats
				Posted: 02 Jun 2014, 13:10
				by SunnyBus
				So, SBS man says: belt for buddy seat would come from same almost same place as passenger belt. Mine has a fixing point already (is the cream coloured circle with the cross in the 1st picture) and you just need to make sure that when you fix the buddy seat you leave enough room for the reel housing (2nd pic). Receiver comes from same point as passenger receiver. Hope this helps.


 
			 
			
					
				Re: seats
				Posted: 02 Jun 2014, 17:42
				by dub1670
				cheers bud, looking into getting a buddy seat now just waiting on a reply from someone.
			 
			
					
				Re: seats
				Posted: 03 Jun 2014, 05:09
				by richlaz
				Apologies for late reply, I don't have a buddy seat in mine. That pic was from Google 

 
			 
			
					
				Re: seats
				Posted: 03 Jun 2014, 09:47
				by dub1670
				roger, no worries hopefully this weekend at bristol volksfest should give me some ideas