Club 80-90 Forums

I read something about a heavy duty clutch arm for a diesel bellhousing? Im going dg to gti so will put a diesel bellhousing on my dt gearbox. Wich clutch arm to fit from what vehicle? Thanks. Tim

standard clutch arm is fine, if it's worn then get a VW style one from RJES they are the best that's out there the aftermarket ones otherwise are worse made than the originals and poor fit and poor welding so more likely to break than the originals

Cheers Aiden. The diesel Bellhousing I have got does not have an arm, so looks like I can just swap over the peyrol one from my dt gearbox.

you need the diesel version cast arm fitted to the clutch fork on a diesel bellhousing, fork is same regardless of fuel type
the cast arms are different because of the difference in the slave cylinder position

Any pictures of the two together....I have no idea what my arm came from!