Page 1 of 1
Advice needed please, it's not working ggrrr
Posted: 07 May 2014, 20:47
by xpertbert
Hi all, my bus went in for a mot, I had a service and fuel filter done at the same time. I wished I had done it myself now. Fuel gauge now doesn't work. Indicators sometimes now stops working, I can hear a clicking around the fuse board. Bloody mechanics. Any tips guys, I'm sorting this myself.
Re: Advice needed please, it's not working ggrrr
Posted: 08 May 2014, 07:31
by MidLifeCrisis
They may have knocked the long white connector on the back of the gauge cluster (perhaps while taking a look at the brake/clutch fluid) - not quite sure how they'd manage that but it's a possibility; what might account for the fuel gauge.
What's the clicking that you are hearing - is that only with the indicators on? What's the indication that the indicators arent working (is it the light on the dash, the indicators themselves, the flash-relay)?
Re: Advice needed please, it's not working ggrrr
Posted: 08 May 2014, 17:58
by xpertbert
When flicking the indicator on, nothing works. But you hear a clicking round the fuse board, is it a relay that is faulty then. This only happens now and again I will have a look behind the dash to, thanks again...
Re: Advice needed please, it's not working ggrrr
Posted: 20 May 2014, 19:48
by clinning
Did this get fixed as have similar problem. Occasionally ns indicator does not come on, and my temp/ fuel gauge does not work. Have had a look at crowns cleaned up a bit and out back. No joy. Thinking that as there was an aftermarket immob fitted could the wiring be shorting some where. Anyway let us know if you find the issue. Marc