Club 80-90 Forums

What's the best hoze to use for the gas /heat vent on a 3way fridge, I do have some metal flex conduit would that do ?

Sounds like what I have. As long as it does not melt, burn or let fumes out before they should then it should be ok

rallye69 wrote:What's the best hoze to use for the gas /heat vent on a 3way fridge, I do have some metal flex conduit would that do ?

The correct pipe of the correct material and the correct bore! Snug on the T, tight on the vent. Unspecified 'metal flex conduit' may or may not 'do' - what specs is the pipe?

Lots of oze HERE

Thought Ghost's link was gonna lead to Fork Handles ,pumps no size 8 ,Oze no 0 for gate

I have Os...with different area codes...

Had my fridge (re) fitted and then certified by a GaSafe engineer. Used aluminium pipe from T piece to vent. This pipe had to be connected to the vent itself (riveted) to ensure it cannot work lose and fall back inside the cavity, thereby venting fumes into the van. This aluminium pipe was also lagged with a heatproof cover to avoid any wires etc touching/melting against it...