Club 80-90 Forums

Has anyone fitted one of these interior kits plus a hob and sink combo?

http://mgdesign.biz/vw_t25_2dr_page.html" onclick="window.open(this.href);return false;

Looks like there's plenty of room for a fridge, and possibly be able to fit a Smev double hob/sink over double cupboard.

Looks good

Description says its profiled to fit the sides of of the van, but in the images the backs are flat

I'd have thought a Smev hob/sink would fit nicely. Could probably also ask them to leave a gap for a specific size of fridge.

Not sure if 12mm MDF is the best material to manufacture them from though..... I personally don't like the stuff and think a decent grade plywood would be better (could also wax/varnish etc to give a nice "natural" wooden finish)

Mdf, even moisture resistant stuff, is far down the list of materials I'd use in the van

Have a look at http://www.tranzwagon.co.uk" onclick="window.open(this.href);return false; uk they have started to do a flatpack interior that looks far superior for around £500 not sure if the t25 stuff is on the website yet but here is a pic. Looks the business!
Lots of mini units too as well as full length stuff.

I saw them at a show and they were really helpful. The wood was surprisingly light for mdf, but finishing the finish (i.e. paint or cover)
myself put me off a little.
They hadn't got anything to fit the t25 at the time but were hoping to get a van in to measure up. Certainly very affordable little kits.