Club 80-90 Forums

hi i have just noticed my 40 amp strip link fuse has blown for my relay system.where could i get some of these today,cheers dave

Don't know about 40, but you could try a 50. Mine has a 50

http://m.gsfcarparts.com/961vg0090" onclick="window.open(this.href);return false;

http://www.ebay.co.uk/itm/5-X-STRIP-MID ... 27de39427d" onclick="window.open(this.href);return false;

Ebay isn't today though - even on quick delivery. You could try a motor accessories place but if you're struggling any place that services bigger vans or trucks will have them.

keytouch wrote:Don't know about 40, but you could try a 50. Mine has a 50

http://m.gsfcarparts.com/961vg0090" onclick="window.open(this.href);return false;

thanks for that got some from gsf,cheers dave

Solder the blown strip fuse very carefully across the break. This will still give the circuit protection whilst you wait for a replacement to arrive. Just brighten the crack edges with a Stanley blade so the solder has a key. There is still plenty of the strip untouched to give the correct fuse rating!



I did this on my daughters Polo when her 60amp? ABS strip developed a crack (quite common apparently...failing through age rather than fault)

Martin