Front diff seal change
Posted: 04 Apr 2014, 11:37
I'm sure this is all common sense but I'll ask if there are any tricks or potential snags on this job.
I have knocked up a wrench to hold the prop flange and I have all the seals, clips, bungs etc. plus a bit of plastic tube to tap the new seals back in.
I presume it's just a case of prise the bung out, remove clip with suitable circlip pliers and withdraw the flange, before prising out the old halfshaft seal?
I have knocked up a wrench to hold the prop flange and I have all the seals, clips, bungs etc. plus a bit of plastic tube to tap the new seals back in.
I presume it's just a case of prise the bung out, remove clip with suitable circlip pliers and withdraw the flange, before prising out the old halfshaft seal?