Page 1 of 1
Torque settings
Posted: 02 Apr 2014, 16:37
by delboy1
Can anyone tell me torque settings on a 1.6 td jx
cylinder head and cam shaft.
Re: Torque settings
Posted: 02 Apr 2014, 16:42
by jamesc76
Re: Torque settings
Posted: 02 Apr 2014, 16:46
by jamesc76
Found this after 1 min of searching
OK here we go
87 engine code JX
With hexagon bolts
renew bolts
stage 1 50NM
stage 2 70NM
stage 3 90NM
run engine to 50c
stage 4 90NM
run engine for 600 miles
stage 5 wait 3.5 hours
stage 6 slacken off 30 degrees then re torque to 90NM.
With spline bolts
stage 1 40NM
stage 2 60NM
stage 3 +180 degrees
run engine to 50c
stage 4 + 90 degrees
run engine for 600 miles
wait 3.5 hours
stage 5 + 90 degrees
Sequence
10,4,2,6,8
7,5,1,3,9
flywheel side -------)
