Page 1 of 1
bumper bolts
Posted: 23 Oct 2006, 19:30
by domiles1
Just removed my bent rear bumper to find it has been held on with basin fixings! I assume these are not correct! And the spacers between the bumper and its mounting bar were a collection of washers and M12 nuts! I cannot find any info on what should be there or where to buy new bumper mounting parts. Can anyone help?
Thanks.
Dom.
bumper bolts
Posted: 23 Oct 2006, 19:35
by Bowton Lad
The rear bumper is held on by four bolts. Two bolts screw in horizontally into the bumper mounting brackets & the other two screw in vertically from underneath.
Posted: 23 Oct 2006, 19:37
by stuckin88
theres no spacers--the rear bumper jus bolts on with m8 bolts & nuts--use 13 mm spanner
bumper bolts
Posted: 23 Oct 2006, 19:49
by Bowton Lad
stuckin88 wrote:--the rear bumper jus bolts on with m8 bolts & nuts--
NUTS!?
There are no nuts holding on the rear bumper, just four bolts. The threads for the bolts are in the two bumper mountain brackets.
Posted: 23 Oct 2006, 19:56
by domiles1
Brackets? I think I have more missing than I first thought! I need a diagram.....???
Posted: 23 Oct 2006, 20:14
by stuckin88
--ha! ha!--yer right--they are m8 bolts tho--the brackets stick thru the rear valance--the plastic endcaps fix to bumper with mushroom head bolts-you bolt these on first then bolt bumper to van iiI do asume tho you are talkin about the standard cheap steel bumper-not the big plastic ones--
bumper bolts
Posted: 23 Oct 2006, 20:15
by Bowton Lad
domiles1 wrote: Brackets?...... I need a diagram.....???
I've consulted the oracle according to Dr.Haynes & he in his wisdom has
decided not to provide any diagrams of T25 bumpers/brackets etc.
Looks like you need to find a scrapper or put an ad in the 'wanted' section of this forum. Hope you find some soon.