Page 1 of 1
ady differences are they both suitable for a t25?
Posted: 06 Mar 2014, 18:14
by Cyrus
I'm looking at a suitable 2.0L replacement but noticed there's a difference in ady engines
This on looks like the standard agg/ ady engine
But this on has a plastic intake over the rocker cover
Is it just to fit a different vehicle e.g. sharan ???
Would it still fit a t25???
Anything else I need to know if I go for the latter??
Cheers cy
Re: ady differences are they both suitable for a t25?
Posted: 06 Mar 2014, 20:28
by mrhutch
ADY is a 2E engine with AGG fueling
Re: ady differences are they both suitable for a t25?
Posted: 06 Mar 2014, 22:58
by Cyrus
OK. The bottom picture shows a plastic? Inlet is that just because its a later model ady and plastic is cheaper and better plastics were available?
Also would the bottom engine still fit in a t25 bay or would that inlet get in the way of the lid?
Cheers for your help.
Re: ady differences are they both suitable for a t25?
Posted: 07 Mar 2014, 05:42
by Titus A Duxass
I'd be more concerned about the side clearance with that inlet.
I have the top ADY installed in mine.
Re: ady differences are they both suitable for a t25?
Posted: 18 Mar 2014, 14:20
by silverbullet
The "plastic" inlet manifold engine is Sharan ADY, actually a 2-piece manifold. The lower half is alloy. It wraps over the rocker box pretty tightly iirc with 4 nice individual runners and without the bulk of the Golf inlet.
You'll need the complete lom and ecu, looks like the throtle body is missing off that Sharan engine (its still a cable throttle though)
