Page 1 of 1

Front end strip down

Posted: 10 Feb 2014, 14:30
by Dazco
Ill be replacing the front discs, bearings , track rod ends and steering rack gators in the next couple of weeks. While I'm at it what other bushes etc are worth replacing .thanks , Daz

Re: Front end strip down

Posted: 10 Feb 2014, 18:41
by Aidan
radius rod bushes probably need doing if original

Re: Front end strip down

Posted: 10 Feb 2014, 18:51
by steve8090
Upper wishbone bushes if you have a mouse living under you seats

Re: Front end strip down

Posted: 10 Feb 2014, 19:41
by kevtherev
Brake flexi hoses

Re: Front end strip down

Posted: 10 Feb 2014, 19:44
by Plasticman
and the clips for the flexis

Re: Front end strip down

Posted: 10 Feb 2014, 20:08
by Dazco
No mice and flexis were replaced last year.
Ill look at radius arm bushes. Thanks very much :ok

Re: Front end strip down

Posted: 10 Feb 2014, 22:03
by CovKid
Drop link and anti roll bar bushes.

Re: Front end strip down

Posted: 10 Feb 2014, 22:19
by kevtherev
CovKid wrote:Drop link and anti roll bar bushes.

Poly bush or Standard.. you decide :D

Re: Front end strip down

Posted: 11 Feb 2014, 01:08
by Dazco
Ill start making another list :roll:
Poly bush v standard , now that's a good question :shock: :whistle

Re: Front end strip down

Posted: 11 Feb 2014, 16:38
by hakuna matata
Top and Bottom ball joints !!

neil.

Re: Front end strip down

Posted: 11 Feb 2014, 19:14
by Dazco
Hiya Neil, I'm thinking now of stripping it down then buying any extras I need. Will meen bring off the road a bit longer , but then I know I'll be getting what I need. Doesn't the lower ball joint need a fairly hefty press for removal and refitting ?

Re: Front end strip down

Posted: 11 Feb 2014, 19:41
by hakuna matata
Dazco wrote:Hiya Neil, I'm thinking now of stripping it down then buying any extras I need. Will meen bring off the road a bit longer , but then I know I'll be getting what I need. Doesn't the lower ball joint need a fairly hefty press for removal and refitting ?

just to let you know I am doing the same job to my van and gona replace the whole lot , after 25 years , she need a little TLC, but re the lower ball joint yes a big press , but i have a friend who works at Merc trucks who have a press, so he,s gona sort that out for me . :ok

Re: Front end strip down

Posted: 11 Feb 2014, 20:04
by Dazco
Ha , it's allright for some :wink:

Re: Front end strip down

Posted: 11 Feb 2014, 22:11
by 988mick
use poly bushes on the steering rack it will improve the steering for only a few quid extra.