Club 80-90 Forums

What are those things called used to thread wires through internal cavities? Got a bunch of wires to hide away and am struggling to feed them through the various spaces.
Can anyone recommend a set, with a URL that works well with these vans??

This sort of thing is what electricians use

http://www.ebay.co.uk/itm/Cable-Rod-Pul ... 0896404949" onclick="window.open(this.href);return false;

Dunno if it will work for you depends on where you are working

Curtain wire is good for short distances, for long distances I have used a heavier drain cleaning one - both the spiral wound wire types. This sort of thing http://www.ebay.co.uk/itm/Red-Plastic-H ... 589ff4a715 -mine is heavier and longer but is about 50 years old! Depends upon how many if any internal lightening/access holes there are across the section that you need to traverse - if there are several the rods may be better as you can lift it to get it through.

picking up cable rod set from maplins tomoz and found some curtain wire in my diy spares for the tight corners.
thx.

It's known is 'Wireman's Tape', RS Components have a good range.

HTH