Page 1 of 1
correct timimg for 2.0cu please
Posted: 11 Dec 2013, 07:06
by bri-on-1
hi all i am booked into a garage tommorow to get my timing set for my 2.0 cu can someone please give me the correct setting please.
Thanks, brian.
Re: correct timimg for 2.0cu please
Posted: 11 Dec 2013, 10:04
by bigherb
If it is stock with the correct distributor with the retard vacuum working as it should, then it is 5 deg after TDC with vacuum hoses connected @850 RPM.
Re: correct timimg for 2.0cu please
Posted: 11 Dec 2013, 22:26
by faggie
or 30 degrees max advance
Re: correct timimg for 2.0cu please
Posted: 16 Dec 2013, 10:07
by billy739
the correct vacuum hoses are the key , along with non leaking vacuum advance
not sure how you can book it into a garage but they dont know how to set it up.
thats no different to you using the labour charge money to buy an ebay special timing light and doing it yourself!