Double bubble double foil backed insulation arrived
Posted: 02 Oct 2013, 19:37
Ok folks I havea question or two.
I have a 83 T25 hIgh top.
Beacuse Myrtle was left in the sun and not used the carpet lining which is still in v good nick is peeling off. I intend to peel it off and stick it to existing carpet using it as a template. Yes I know Im a lazy cow.I have two cans of carpet spray adhesive high temp. Do I spray the fibreglas first then spray carpet stick the insulation to that and as thats taken mea while just shove it back into place/ Or am I better using a liquid glue?
2nd question. Insulating the sides. Take off cards in innocent belief I have no rot on interior metal. If thats the case do I dynax the metal. Then glue the insulation to inside of cards thereby leaving a good thermal layer. Or do I forget the dynax and just wedge the insulation in. Im concerned re condensation.
Ive got room for mistakes as I have accidently ordered 50 sq metres insteda of 30 but I reckon high top wil take at least 8 sq metres.
I also intend to cut out templates slightly larger than the windows and stick those velcro thingies to them that I can then use to stick to carpet lining directly over glass thus giving me extrra layer of insulation and privacy and my curtains run over. Thought it was best if Im going to Final Fling and intend camping out at least once a month during winter.
Any comments from the more experience and less cack handed than me gratefully recieved
I have a 83 T25 hIgh top.
Beacuse Myrtle was left in the sun and not used the carpet lining which is still in v good nick is peeling off. I intend to peel it off and stick it to existing carpet using it as a template. Yes I know Im a lazy cow.I have two cans of carpet spray adhesive high temp. Do I spray the fibreglas first then spray carpet stick the insulation to that and as thats taken mea while just shove it back into place/ Or am I better using a liquid glue?
2nd question. Insulating the sides. Take off cards in innocent belief I have no rot on interior metal. If thats the case do I dynax the metal. Then glue the insulation to inside of cards thereby leaving a good thermal layer. Or do I forget the dynax and just wedge the insulation in. Im concerned re condensation.
Ive got room for mistakes as I have accidently ordered 50 sq metres insteda of 30 but I reckon high top wil take at least 8 sq metres.
I also intend to cut out templates slightly larger than the windows and stick those velcro thingies to them that I can then use to stick to carpet lining directly over glass thus giving me extrra layer of insulation and privacy and my curtains run over. Thought it was best if Im going to Final Fling and intend camping out at least once a month during winter.
Any comments from the more experience and less cack handed than me gratefully recieved
