Page 1 of 1
Replacement Fiamma ends?
Posted: 21 Sep 2013, 15:05
by danmetallic
Re: Replacement Fiamma ends?
Posted: 21 Sep 2013, 15:10
by ninja.turtle007
Fiamma have most parts available. Have a look of their website for the exploded diagrams for the part numbers.
Re: Replacement Fiamma ends?
Posted: 21 Sep 2013, 15:13
by danmetallic
Great stuff. I'll take a look. Was worried that as it's an older model I might not be able to get the parts.
Re: Replacement Fiamma ends?
Posted: 21 Sep 2013, 16:14
by Daisy
Re: Replacement Fiamma ends?
Posted: 21 Sep 2013, 16:22
by Cruz
the12voltshop sell them too
E D I T: Only awning I can find with a hex bolt on the end is the F45 Elegance XL L with was 4m long and above (I'd assume all that is different is the main awning and the caps are just the same for shorter awnings)
Cap number is 02595-01
And it's £15.26 + postage at Fiamma
http://www.thefiammacentre.co.uk/magent ... 45-4m.html" onclick="window.open(this.href);return false;
£13.78+post at 12voltshop
http://www.the12voltshop.co.uk/Shop/025 ... 45-4m.html" onclick="window.open(this.href);return false;
Also there's an endcap to cover the hexbolt if you are missing that too
http://www.the12voltshop.co.uk/Shop/986 ... ce-4m.html" onclick="window.open(this.href);return false;
http://www.thefiammacentre.co.uk/magent ... ce-4m.html" onclick="window.open(this.href);return false;
Re: Replacement Fiamma ends?
Posted: 26 Sep 2013, 17:59
by danmetallic
I'm been off the forum for a week or so... Thanks for the tips! Discovered the same ones as the posts above and bought the lot in the hope one of them will fit. Unfortunately it seems Fiamma changed the height and fitting every bl@@dy time. Might have to get something made up if none of these work. Thanks again!
Re: Replacement Fiamma ends?
Posted: 27 Sep 2013, 11:50
by danmetallic
Having a lot of trouble tracking one down. The full title is Fiamma F45 Deluxe S which apparently they only made for 6 months. Manage to find an exploded view on a French site as well as an old one someone was selling on fleabay.

Re: Replacement Fiamma ends?
Posted: 30 Sep 2013, 19:03
by danmetallic
Seems I might have lucked out with part 02771-01 originally made for the F45 Plus / Elegance. Will have to drill a hole through the end though for the bolt that holds the material rod. Fingers crossed I don't break the plastic.
Posted: 02 Oct 2013, 15:24
by danmetallic
Finally got it to work with an adapted end of an Fiamma Elegance.
